EU Packaging Regulation 2025/40 - PFAS and Compliance Guide
Aug 13, 2026
EU PPWR Enforcement Begins August 12: What Tea and Coffee Packaging Suppliers Need to Know
On August 12, 2026, a regulation that has been working its way through the European legislative system for over a year will finally take full effect. The Packaging and Packaging Waste Regulation, known as PPWR and formally designated Regulation (EU) 2025/40, replaces the Packaging and Packaging Waste Directive (94/62/EC) that has been in place for nearly three decades. If you manufacture, import, or sell packaged tea or coffee products in the European Union, this date marks a shift in how you need to think about your packaging materials.
From Directive to Regulation: Why This Matters
The most significant change is the shift from a directive to a regulation. Under the previous directive (94/62/EC), each EU member state was responsible for translating the requirements into national law, which led to inconsistent implementation and enforcement across countries. A regulation, by contrast, is directly applicable in all 27 member states without the need for national transposition. This means the compliance bar is now uniform across the entire EU, and there is no longer room for the kind of regulatory fragmentation that existed under the old system.
The PPWR was published in the Official Journal of the European Union on January 22, 2025, entered into force on February 11, 2025, and its core provisions become applicable on August 12, 2026. The European Commission's official environment portal confirms that the regulation covers all packaging and packaging waste, regardless of material or origin, and sets requirements for manufacturing, composition, and the reusable or recoverable nature of all packaging placed on the EU market (European Commission, Environment Directorate-General, Packaging Waste).
PFAS Restrictions: Direct Impact on Food Contact Packaging
For manufacturers of tea bags and coffee filters, the most immediately relevant provision is the restriction on per- and polyfluoroalkyl substances (PFAS) in food contact packaging. Starting August 12, 2026, food contact packaging must meet the following PFAS limits: any single PFAS substance (non-polymer) must not exceed 25 ppb; the sum of all PFAS substances (non-polymer) must not exceed 250 ppb; and the total fluorine content from PFAS polymers must not exceed 50 ppm. If the total fluorine content exceeds 50 ppm, the manufacturer must provide technical documentation demonstrating whether the fluorine is from PFAS or non-PFAS sources (Regulation (EU) 2025/40, Article 5).
Critically, there is no stockpile grace period. Packaging that does not meet the PFAS limits cannot be placed on the EU market after August 12, 2026, regardless of when it was manufactured. This means that any packaging currently in warehouses or in transit needs to be verified for PFAS compliance before it reaches the EU market. For our own products, we have confirmed through SGS testing that our nylon mesh, PLA mesh, filter paper, and non-woven materials do not contain PFAS substances above the regulatory thresholds, and we maintain test documentation for every production lot.
Tea and Coffee Bags Are Explicitly Covered
One question that comes up in discussions with clients is whether tea bags and coffee filters actually count as packaging under the PPWR. The answer is unambiguous: yes. The regulation's definition of packaging explicitly includes permeable tea, coffee or other beverage bags, and single-portion units that are designed to be used with a compatible device and are intended to be discarded after use (Regulation (EU) 2025/40, Article 3(1)(1)(f) and (g)).
This means that the mesh, filter paper, or non-woven material used to make a tea bag or coffee filter is subject to the same compliance requirements as any other food contact packaging. The heavy metal limits apply (lead, cadmium, mercury, and hexavalent chromium must not exceed 100 mg/kg in total), the PFAS restrictions apply, and the packaging must meet the recyclability requirements that will be phased in over the coming years.
Heavy Metal Limits and Recyclability Requirements
The heavy metal limit of 100 mg/kg for the combined total of lead, cadmium, mercury, and hexavalent chromium is not new, as it was already present in the old directive. However, under the regulation, enforcement will be more consistent and there is no room for varying interpretations across member states. For our materials, we have always tested well below this threshold, and our SGS test reports confirm compliance with both the heavy metal limits and the broader food contact material regulations.
The recyclability requirements are phased in over a longer timeline. Starting January 1, 2030, all packaging placed on the EU market must achieve a recyclability performance grade of C or above, meaning a recyclability score of at least 75 percent. By January 1, 2038, only packaging achieving grade A or B (recyclability score of at least 80 percent) will be permitted. This is a longer-term consideration, but it is one that packaging designers and material suppliers should be thinking about now, because the material choices made today will need to comply with these future requirements.
It is worth noting that the PPWR also includes provisions on compostable packaging under Article 9. Tea bags, coffee filters, and fruit and vegetable labels are specifically mentioned in the context of compostability requirements. This means that brands using non-compostable materials for tea bags or coffee filters may face additional regulatory pressure in the coming years, and should monitor how these provisions are implemented in practice. For our clients, this is one of the reasons we maintain both nylon mesh and PLA mesh product lines, as the regulatory landscape may favor compostable options for certain applications in the EU market.
What This Means for Our Clients
For brands and manufacturers sourcing packaging materials from us, the PPWR creates a clear set of compliance obligations. First, ensure that your packaging materials are tested for PFAS compliance and that you have the documentation to prove it. We provide SGS test reports with our shipments, and we can supply additional testing if your compliance team requires it. Second, verify that the heavy metal content of your packaging is within the 100 mg/kg limit. Third, if you are selling into the EU through a distributor or importer, clarify who holds the Extended Producer Responsibility (EPR) registration in each member state, as the PPWR requires EPR registration in the country where the packaging is first placed on the market.
It is also worth noting that the PPWR applies regardless of where the packaging is manufactured. If the packaged product is sold in the EU, the packaging must comply, even if it was produced in China or any other non-EU country. Non-EU manufacturers must appoint an authorized representative within the EU to handle compliance obligations. This is a practical consideration for our clients, and we support them by providing the technical documentation and test reports they need to demonstrate compliance.
We view the PPWR not as a threat but as a validation of the quality standards we have maintained all along. Our materials have always been produced under ISO 22000 and HACCP certified food safety management systems, tested against FDA and EU 10/2011 standards, and we have never used PFAS coatings or treatments in our production process. The regulation reinforces what we have been telling clients for years: that material safety documentation is not optional, it is a market access requirement.
